AE20125 10 MHz Sweep DDS Function Generator Kit With USB And Modulation

• Popularity - 81019 views, 11574.1 views per day, 7 days on eBay. Super high amount of views. 444 sold.
• Price - Avg: $0.00, Low: $0.00, High: $0.00. Best quality when compared to PicClick similar items.
• Seller - + items sold. 0% negative feedback. Great seller with very good positive feedback and over 50 ratings.

ASCEL ELECTRONIC<br>Revision 3: Improved Performance!<br>Many improvements: multilayer PCB, firmware updates over USB, increased signal quality...<br>AE20125 10MHz Sweep DDS Function Generator Kit with Modulation and USB<br>DESCRIPTION:<br>The AE20125 is a kit for a 10 MHz DDS Function Generator with Sweep, Frequency- and Phase Modulation and USB<br>Sine<br>(0.1 Hz to 10 MHz),<br>Triangle<br>and<br>Square wave<br>(0.1 Hz to 2.5 MHz)<br>Frequency Resolution:<br>0.1 Hz<br>over the whole range<br>Output Amplitude:<br>0 - 5Vpp, 50 Ohm impedance<br>DC Offset:<br>10V (-5V to +5V)<br>Sweep:<br>start, stop and sweep frequency as well as direction and type<br>(Start->Stop->... or Start->Stop->Start->...) adjustable, Sync-Output<br>Modulation:<br>frequency and phase modulation, internal or external modulation source, adjustable internal frequency<br>PLL<br>Display function with -factor and -offset for the use as a PLL reference<br>5 storable Presets<br>USB Interface<br>(optional, see below) full software control, software inclusive. Data format fully documented<br>Frequency Accuracy:<br>50ppm out-of-the-box, menu-based calibration for even greater accuracy<br>Yellow-green<br>or<br>blue<br>LCD<br>with backlight<br>All settings can be stored, start-up frequency and waveform adjustable<br>A comprehensive printed 64 pages Assembly and Operation Manual is included (in english, german and english manuals in PDF format also available on the enclosed CD).<br>The manual covers all the techniques needed including soldering.<br>All SMD parts are pre-assembled, only through-hole components have to be soldered!<br>The kit contains all necessary parts, the programmed and tested microcontroller, the high quality, E-Tested PCB with gold finish and a 2x16 LCD with backlight. No additional parts or components are required!<br>Yellow-green or blue backlight is selectable at no additional cost. A machined enclosure is also available (see below).<br>This kit is also suitable for beginners in electronics.<br>We provide continuous support before and after you buy.<br>Please contact us if you have any questions. Also if you need a modification or a device custom built to your needs.<br>OPTIONS:<br>USB Interface:<br>The USB option is available for only $7. It provides an USB 1.1/2.0 interface that allows reading out the values and full software control. The software is included.<br>It also allows firmware updates, which will add new features in the future.<br>Screenshot of the included software.<br>The plain text data format is fully documented in the included documentation to allow simple integration with external tools and systems.<br>A matching USB-A-A cable is available here.<br>Display:<br>Two displays with backlight are available for<br>no extra charge<br>:<br>yellow-green<br>(-YG) and<br>blue<br>(-BL).<br>Case Enclosure:<br>A machined enclosure with all needed cut-outs and labeling is available for $16.<br>Size: (WxHxL) 110x60x107mm (4.33"x2.36"x4.21").<br>Accessories:<br>15V Mains Adapter (220V Euro plug): $11<br>15V Mains Adapter (120V US/Canada plug): $11<br>SPECIFICATIONS:<br>Waveforms:<br>Sinus, Square, Triangle<br>Max. Frequency:<br>Sinus: 0.1 Hz - 10 MHz<br>Square: 0.1 Hz - 2.5 MHz<br>Triangle: 0.1 Hz - 2.5 MHz<br>Adjustment Step:<br>0.1 Hz over the whole range<br>Accuracy:<br>50ppm (calibratable)<br>Max. Amplitude:<br>5Vpp<br>DC Offset:<br>10V (-5V to +5V)<br>Output Impedance:<br>50 Ohm<br>Modulation:<br>FSK, PSK<br>FSK Frequency Swing:<br>±0.1 Hz - 10 MHz<br>PSK Phase Swing:<br>±0.1° - 359.9°<br>Modulation Source:<br>intern, extern<br>Internal Modulation Frequency:<br>0.1 Hz - 1 kHz<br>Sw